Publications

(2020). Computational fluid dynamics investigation of the thermal performances of a swirler with profiled blades. Heat Transfer Engineering Journal.

(2019). Numerical investigation of several twisted tubes with non-conventional tube cross sections on heat transfer and pressure drop. Journal of Thermal Analysis and Calorimetry.

PDF DOI

(2019). Pascal, Bernoulli et Torricelli sont sur un bateau…. Congrès Français de Mécanique.

(2019). Numerical Investigation of short elliptical twisted tube for reduced fouling rate in steam cracking furnaces.

(2018). Mesh Twisting Technique for Swirl Induced Laminar Flow Used to Determine a Desired Blade Shape. Applied Sciences.

PDF DOI

(2018). CFD study of the convective heat transfer in a swirling flow for several flow regimes. SFT 2018.

(2018). Combustion characterization in a biomass boiler with PAHs oxidation. 25th « Journées d'étude » Belgian Section of the Combustion Institute.

(2017). Mock-up Study of the Effect of Wall distance on the Thermal Rating of Power Cables in Ventilated Tunnels. IEEE Transactions on Power Delivery.

PDF DOI

(2017). Étude aéro-thermochimique d'une chaudière biomasse. Journées Biomasse.

(2017). Étude aéro-thermochimique numérique et expérimentale d'une chaudière biomasse. Colloque du Groupe Français de Cinétique et Photochimie (GFCP).

(2017). Taylor-Couette-Poiseuille flow and heat transfer in an annular channel with a slotted rotor. International Journal of Thermal Sciences.

PDF DOI

(2016). Effect of Proximity on the Thermal Rating of a Single Power Cable in Ventilated Tunnels.

(2016). A thermal study of power cables cooling in tunnels. Journal of Physics: Conference Series.

PDF DOI

(2016). Fundamental mode of freely decaying laminar swirling flows. Applied Mathematical Modelling.

PDF DOI

(2015). Design of a device to induce swirling flow in pipes: A rational approach. Comptes Rendus Mécanique.

PDF DOI

(2014). Study of a Taylor-Couette-Poiseuille flow in an annular channel with a slotted rotor. Institute of Electrical and Electronics Engineers (IEEE).

PDF DOI

(2014). Heat transfer coefficient distribution on the pole face of a hydrogenerator scale model. Applied Thermal Engineering.

PDF DOI

(2013). Effects of a turbulent wall jet on heat transfer over a non-confined backward-facing step. International Journal of Heat and Fluid Flow.

PDF DOI

(2013). Effects of a turbulent wall jet over a non-confined backward-facing step. Begel House Inc..

(2013). Inducing Swirling Flow in Heat Exchanger Pipes for Reduced Fouling Rate. Heat Transfer Engineering.

PDF DOI

(2013). Effets d’un jet relaché sur les transferts thermiques en aval d’une marche descendante non-confinée.

(2011). Increased shear stress in annular swirling flow for reduced fouling rate.

(2010). Etude numérique de la structure de l'écoulement dans un alternateur discoïde d'une éolienne.

(2007). An Experimental Investigation of the Separation Points on a Circular Rotating Cylinder in Cross Flow. Journal of Fluids Engineering.

PDF DOI

(2005). Effet du soufflage a travers une paroi poreuse dans un canal bidimensionnel.

(2004). An Experimental Investigation of the Separation Points on a Circular Rotating Cylinder in Cross Flow.

(2003). Large eddy simulations of plane turbulent impinging jets at moderate Reynolds numbers. International Journal of Heat and Fluid Flow.

PDF DOI

(2002). Large Eddy Simulation of a plane impinging jet. Comptes Rendus Mécanique.

PDF DOI

(2001). Modélisations expérimentale et numérique des jets utilisés pour le confinement et la protection rapprochée.

(2001). Large Eddy Simulation of a plane turbulent impinging jet.

(2001). Etude d'un jet plan turbulent impactant par simulation des grandes échelles.

(2001). Etude d'un jet plan turbulent en impact proche par simulation des grandes échelles.

(2000). Numerical and experimental visualizations of a plane turbulent jet impinging on a flat and smooth plate..